Accelerometers

GA50

The GA50 series high-end open loop MEMS accelerometers are available in various sensing ranges. The accelerometer is based on a bulk micromachined silicon MEMS device and an application specific integrated circuit (ASIC) with an analog front end (AFE) and a temperature sensor, assembled in a custom-tailored, hermetically sealed, and compact LCC20 package.

GA50-070-100 Open Loop MEMS Accelerometer

Multiple G Ranges: ±5, ±40, ±70

Excellent Long Term Bias Repeatability
Nav-Grade Short Term Stability
Nav-Grade Ultra-Low VRW Noise
Low Scale Factor

A300D

The new A300D is Gladiator Technologies’ ultra-low noise three-axis digital MEMS accelerometer with high dynamic range sensors. At only 0.6 cubic inches, the A300D accelerometer comes factory calibrated over the full temperature range, conditioned over environments.

±40 g

Sensor Range

0.058 mg /√Hz

VRW

0.5 mg

Bias Over Temperature

44µs

Message Delay

0.6

Cubic Inches

800Hz

Bandwidth

A300D

The new A300D is Gladiator Technologies’ ultra-low noise three-axis digital MEMS accelerometer with high dynamic range sensors. At only 0.6 cubic inches, the A300D accelerometer comes factory calibrated over the full temperature range, conditioned over environments.

±40 g

Sensor Range

0.058 mg /√Hz

VRW

0.5 mg

Bias Over Temperature

44µs

Message Delay

0.6

Cubic Inches

800Hz

Bandwidth

A300D

The new A300D is Gladiator Technologies’ ultra-low noise three-axis digital MEMS accelerometer with high dynamic range sensors. At only 0.6 cubic inches, the A300D accelerometer comes factory calibrated over the full temperature range, conditioned over environments.

±40 g

Sensor Range

0.058 mg /√Hz

VRW

0.5 mg

Bias Over Temperature

44µs

Message Delay

0.6

Cubic Inches

800Hz

Bandwidth

A40 Accelerometer

The A40 Accelerometer is a small, ultra-low noise, single-axis MEMS accel. This robust accel is designed to handle 500g shock and 5.74g RMS vibration in an EMI resistant housing. Its price and performance are ideal for low frequency motion and tilt measurement.

15g Accelerometer

0.6

Cubic Inches

0.7 mg

Bias Repeatability

0.065mg/√Hz

Bias Stabilty

2.5 VDC

Analog Output 

10kHz

Data Rates

500g

Shock Tolerance

A40 Accelerometer

A40 Accelerometer

0.6

Cubic Inches

0.7 mg

Bias Repeatability

0.065mg/√Hz

Bias Stabilty

2.5 VDC

Analog Output 

10kHz

Data Rates

500g

Shock Tolerance

The A40 Accelerometer is a small, ultra-low noise, single-axis MEMS accel. This robust accel is designed to handle 500g shock and 5.74g RMS vibration in an EMI resistant housing. Its price and performance are ideal for low frequency motion and tilt measurement.

A40 Accelerometer

A40 Accelerometer
The A40 Accelerometer is a small, ultra-low noise, single-axis MEMS accel. This robust accel is designed to handle 500g shock and 5.74g RMS vibration in an EMI resistant housing. Its price and performance are ideal for low frequency motion and tilt measurement.

0.6

Cubic Inches

0.7 mg

Bias Repeatability

0.065mg/√Hz

Bias Stabilty

2.5 VDC

Analog Output 

10kHz

Data Rates

500g

Shock Tolerance

Gyroscopes

G300D Triax Gyro

The G300D is Gladiator Technologies’ high speed, three-axis MEMS gyroscope equipped with low noise sensors, VELOX™ high speed processing and user configurable firmware. At only .6 cubic inches, the G300D gyro comes factory calibrated over the full temperature range, conditioned over environments and is ideal for precision stabilization and rotation measurement applications.

G300D Triax Gyroscope

490°/s Rate Range

0.6

Cubic Inches

0.0017°/s/√Hz

ARW

0.075°/s

Bias Stability

600Hz

Bandwidth 

10kHz

Data Rates

20µs

Message Delay

G300D Triax Gyro

G300D Triax Gyroscope

The G300D is Gladiator Technologies’ high speed, three-axis MEMS gyroscope equipped with low noise sensors, VELOX™ high speed processing and user configurable firmware. At only 0.6 cubic inches, the G300D gyro comes factory calibrated over the full temperature range, conditioned over environments and is ideal for precision stabilization and rotation measurement applications.

0.6

Cubic Inches

0.0017°/s/√Hz

ARW

0.075°/s

Bias Stabilty

600Hz

Bandwidth 

10kHz

Data Rates

20µs

Message Delay

G300D Triax Gyro

G300D Triax Gyroscope

0.6

Cubic Inches

0.0017°/s/√Hz

ARW

0.075°/s

Bias Stabilty

600Hz

Bandwidth 

10kHz

Data Rates

20µs

Message Delay

The G300D is Gladiator Technologies’ high speed, three-axis MEMS gyroscope equipped with low noise sensors, VELOX™ high speed processing and user configurable firmware. At only .6 cubic inches, the G300D gyro comes factory calibrated over the full temperature range, conditioned over environments and is ideal for precision stabilization and rotation measurement applications.

G200
Dual Axis Gyro

The G200 is Gladiator Technologies’ high speed, two-axis MEMS gyroscope equipped with ultra low noise sensors. At only 0.6 cubic inches, the G300D gyro comes factory calibrated over the full temperature range, conditioned over environments and is ideal for precision stabilization and rotation measurement applications.

100°/s or 300°/s Rate Range

.5

Cubic Inches

0.003°/s/√Hz

ARW

<0.0028°/sec

Short Term Bias Stabilty

200Hz

Bandwidth 

500g

Shock

4.75

Voltage Reference

G150Z
Single Axis Analog Gyro

The G150Z Analog MEMS Gyroscope is a small, ultra-fast, single axis gyro featuring low noise MEM’s sensors. This environmentally sealed gyro is rated for 500g shock and 6g RMS vibration. The G150Z’s analog output voltage is ±4.75 volts and it is available in three rate ranges.  Applications include stabilization, flight control, navigation and automotive testing.

G150Z Gyroscope MEMS

175°/s or 300°/s Rate Range

1.1

Cubic Inches

0.001°/s/√Hz

ARW

1.2°/h

Short Term Bias Stabilty

200Hz

Bandwidth 

500g

Shock

4.75

Voltage Reference

G150Z
Single Axis Analog Gyro

G150Z Gyroscope MEMS

The G150Z Analog MEMS Gyroscope is a small, ultra-fast, single axis gyro featuring low noise MEM’s sensors. This environmentally sealed gyro is rated for 500g shock and 6g RMS vibration. The G150Z’s analog output voltage is ±4.75 volts and it is available in three rate ranges.  Applications include stabilization, flight control, navigation and automotive testing.

1.1

Cubic Inches

0.001°/s/√Hz

ARW

1.2°/h

Short Term Bias Stabilty

200Hz

Bandwidth 

500g

Shock

4.75

Voltage Reference

G150Z
Single Axis Analog Gyro

G150Z Gyroscope MEMS

1.1

Cubic Inches

0.001°/s/√Hz

ARW

1.2°/h

Short Term Bias Stabilty

200Hz

Bandwidth 

500g

Shock

4.75

Voltage Reference

The G150Z Analog MEMS Gyroscope is a small, ultra-fast, single axis gyro featuring low noise MEM’s sensors. This environmentally sealed gyro is rated for 500g shock and 6g RMS vibration. The G150Z’s analog output voltage is ±4.75 volts and it is available in three rate ranges.  Applications include stabilization, flight control, navigation and automotive testing.

Inertial Measurement Units

LandMark™005 IMU

The LandMark™005 IMU is Gladiator Technologies’ high speed, six-axis MEMS Inertial Measurement Unit (IMU) equipped with low noise sensors, VELOX™ high speed processing and user configurable firmware.  Only 0.6 cubic inches, the LandMark™005 comes factory calibrated over the full temperature range, conditioned over environments.
LandMark005 IMU

490°/s Gyroscopes

15g Accelerometers

0.6

Cubic Inches

0.0017°/s/√Hz

ARW

0.075°/s

Bias Over Temperature 

600Hz

Bandwidth 

10kHz

Data Rates

<29µs

Message Delay

LandMark™007 IMU

High speed, six-axis IMU built for high dynamic environments.

This IMU is equipped with low noise sensors and VELOX™ high speed processing and user configurable firmware. Only 0.7 cubic inches, the LandMark™007 comes factory calibrated over the full temperature range and conditioned over environment.
LandMark™007 IMU

2000°/s Gyroscopes

98g Accelerometers

2000°/s

Rate Range

0.0025°/s/√Hz

ARW

0.075°/s

Bias Over Temperature

98g

Accel Range 

10kHz

Data Rates

<114µs

Message Delay

LandMark™007X IMU

High Dynamic 6 Axis IMU

The LandMark™007X IMU is Gladiator Technologies’ high speed, six-axis MEMS Inertial Measurement Unit (IMU) built for high dynamic environments. This IMU is equipped with low noise sensors and VELOX™ high speed processing and user configurable firmware.  Only 0.7 cubic inches, the LandMark™007X comes factory calibrated over the full temperature range, conditioned over environments

LandMark™007 IMU

2000°/s Gyroscopes

200g Accelerometers

2000°/s

Rate Range

0.0017°/s/√Hz

ARW

0.1°/s

Bias Over Temperature

200g

Accel Range 

10kHz

Data Rates

<114µs

Message Delay

LandMark™60LX IMU
Ultra Low VRW

LandMark™65 IMU
High Dynamic

MRM60 IMU
Analog Output

LandMark™ 60 IMU

490°/s Gyroscopes

15g Accelerometers

28ug/s/√Hz

Accel VRW

 

0.0016°/sec/√Hz

ARW

 

VELOX™

High Speed Processing

LandMark™ 65 IMU

2000°/s Gyroscopes

40g Accelerometers

1000g

Shock Rating

 

0.002°/sec/√Hz

ARW

 

VELOX™

High Speed Processing

LandMark 60 IMU

490°/s Gyroscopes

15g Accelerometers

28ug/s/√Hz

Accel VRW

 

0.0016°/sec/√Hz

ARW

 

VELOX™

High Speed Processing

The LandMark™60LX IMU is Gladiator Technologies’ High Performance six-axis MEMS IMU with exceptionally low accelerometer noise (28µg VRW).  This IMU is factory calibrated over the full temperature range, conditioned over environments and is ideal for stabilization, navigation and precision measurement applications.

The LandMark™65 IMU is a high dynamic six-axis MEMS IMU. This IMU is designed and built for the most demanding dynamic environments, calibrated over temperature and is powered with VELOX™ Processing for low latency high output rates. This IMU is ideal for high dynamic applications that require precision motion measurement

The MRM60 Analog IMU is a High Performance six-axis MEMS IMU with Analog Output. Equipped with low noise sensors, the MRM60 IMU delivers precision measurement with analog outputs in either ± 2.5 volt or ± 5 volt ranges. This IMU is ideal for precision measurement applications critical in rail, industrial, and automotive industries.

LandMark™60 IMU
Standard 6-Axis IMU

LandMark™60VG
Vertical Gyro

LandMark™01 IMU
Low Cost IMU

LandMark™ 60 IMU

490°/s Gyroscopes

15g Accelerometers

3°/h

Bias Stability

 

0.0016°/sec/√Hz

ARW

 

VELOX™

High Speed Processing

LandMark™ 65 IMU

490°/s Gyroscopes

15g Accelerometers

0.1°

Pitch and Roll Angles

 

0.002°/sec/√Hz

ARW

 

VELOX™

High Speed Processing

LandMark 01 IMU

490°/s Gyroscopes

15g Accelerometers

1

Cubic Inch

 

0.0035°/sec/√Hz

ARW

 

VELOX™

High Speed Processing

The LandMark™60 IMU is a High Performance six-axis MEMS Inertial Measurement Unit. Equipped with low noise sensors, VELOX™ processing and user configurable firmware, the LandMark™60  delivers precision measurement. This IMU is factory calibrated over the full temperature range, conditioned over environments and is ideal for stabilization, navigation and precision measurement applications.
The LandMark™60VG provides pitch and roll angle outputs. Utilizing the same hardware as the LandMark™60LX, this low noise inertial system is ideal for measurement applications. Optional protocol of RS485 or CANbus.
The LandMark™01 IMU is an affordable, low noise, six-axis MEMS IMU. Unlike other low priced alternatives, this compact IMU comes factory calibrated over the full temperature range and is conditioned over environments. The LandMark™01’s low cost, small size, and excellent performance make it ideal for applications in stabilization, low cost navigation, and flight testing.

LandMark™005 IMU

LandMark005 IMU
The LandMark™005 IMU is Gladiator Technologies’ high speed, six-axis MEMS Inertial Measurement Unit (IMU) equipped with low noise sensors, VELOX™ high speed processing and user configurable firmware.  Only 0.6 cubic inches, the LandMark™005 comes factory calibrated over the full temperature range, conditioned over environments.

0.6

Cubic Inches

0.0018°/s/√Hz

ARW

0.075°/s

Bias Over Temperature

600Hz

Bandwidth 

10kHz

Data Rates

<115µs

Message Delay

LandMark™007 IMU

LandMark™007 IMU

This IMU is equipped with low noise sensors and VELOX™ high speed processing and user configurable firmware. Only 0.7 cubic inches, the LandMark™007 comes factory calibrated over the full temperature range and conditioned over environment.

98g

Accel Range 

2000°/s

Rate Range

10kHz

Data Rates

0.0025°/s/√Hz

ARW

<115µs

Message Delay

0.075°/s

Bias Over Temperature

LandMark™007X IMU

LandMark™007X IMU

The LandMark™007X IMU is Gladiator Technologies’ high speed, six-axis MEMS Inertial Measurement Unit (IMU) built for high dynamic environments. This IMU is equipped with low noise sensors and VELOX™ high speed processing and user configurable firmware.  Only 0.7 cubic inches, the LandMark™007X comes factory calibrated over the full temperature range, conditioned over environments

200g

Accel Range 

2000°/s

Rate Range

10kHz

Data Rates

0.002°/s/√Hz

ARW

<115µs

Message Delay

0.075°/s

Bias Over Temperature

Need Help Deciding?

Contact our team to find the right IMU for you application. 

Contact Us

LandMark™60LX IMU
Ultra Low VRW

LandMark™ 60 IMU

490°/s Gyroscopes

15g Accelerometers

28ug/s/√Hz

Accel VRW

0.0016°/sec/√Hz

ARW

VELOX™

High Speed Processing

The LandMark™60LX IMU is Gladiator Technologies’ High Performance six-axis MEMS IMU with exceptionally low accelerometer noise (28µg VRW).  This IMU is factory calibrated over the full temperature range, conditioned over environments and is ideal for stabilization, navigation and precision measurement applications.

LandMark™65 IMU
High Dynamic IMU

LandMark™ 65 IMU

2000°/s Gyroscopes

40g Accelerometers

1000g

Shock Rating

 

0.002°/sec/√Hz

ARW

 

VELOX™

High Speed Processing

The LandMark™65 IMU is a high dynamic six-axis MEMS IMU. This IMU is designed and built for the most demanding dynamic environments, calibrated over temperature and is powered with VELOX™ Processing for low latency high output rates. This IMU ideal for high dynamic applications that require precision motion measurement

MRM60 IMU
Analog Output

LandMark 60 IMU

490°/s Gyroscopes

15g Accelerometers

28ug/s/√Hz

Accel VRW

 

0016°/sec/√Hz

ARW

 

± 2.5 or ± 5

Reference Voltage

The MRM60 Analog IMU is a High Performance six-axis MEMS IMU with Analog Output. Equipped with low noise sensors, the MRM60 IMU delivers precision measurement with analog outputs in either ± 2.5 volt or ± 5 volt ranges. This IMU is factory calibrated over the full temperature range, conditioned over environments and is ideal for precision measurement applications critical in rail, industrial, and automotive industries.

LandMark™01 IMU
Low Cost

LandMark 01 IMU

490°/s Gyroscopes

15g Accelerometers

1

Cubic Inch

 

0.0035°/sec/√Hz

ARW

 

VELOX™

High Speed Processing

The LandMark™01 IMU is an affordable, low noise, six-axis MEMS IMU. Unlike other low priced alternatives, this compact IMU comes factory calibrated over the full temperature range and is conditioned over environments. The LandMark™01’s low cost, small size, and excellent performance make it ideal for applications in stabilization, low cost navigation, and flight testing.

Inertial Navigation Systems

LandMark™005 INS/GPS

A compact, high performance Inertial Navigation System with GNSS/GPS receiver. A low noise inertial suite and Extended Kalman Filter enable accurate position data through GPS denial. The LandMark™005 INS/GPS is a preferred choice for applications in land, air and sea.

LandMark 005 Inertial-Navigation-System

490°/s Gyroscopes

15g Accelerometers

0.25°

Pitch and Roll Angles

3 NMPH

Free Inertial (short term)

0.1°/s

Bias Stability

0.5°

Heading Accuracy

0.0028°/s/√Hz

ARW

34.8

cm³

LandMark™005 INS/GPS

LandMark 005 Inertial-Navigation-System

490°/s Gyroscopes

15g Accelerometers

0.25°

Pitch and Roll Angles

3 NMPH

Free Inertial (short term)

0.1°/s

Bias Stability

0.5°

Heading Accuracy

0.0028°/s/√Hz

ARW

34.8

cm³

A compact, high performance Inertial Navigation System with GNSS/GPS receiver. A low noise inertial suite and Extended Kalman Filter enable accurate position data through GPS denial. The LandMark™005 INS/GPS is a preferred choice for applications in land, air and sea.

LandMark™005 INS/GPS

LandMark 005 Inertial-Navigation-System

490°/s Gyroscopes

15g Accelerometers

A compact, high performance Inertial Navigation System with GNSS/GPS receiver. A low noise inertial suite and Extended Kalman Filter enable accurate position data through GPS denial. The LandMark™005 INS/GPS is a preferred choice for applications in land, air and sea.

0.25°

Pitch and Roll Angles

3 NMPH

Free Inertial (short term)

0.1°/s

Bias Stability

0.5°

Heading Accuracy

0.0028°/s/√Hz

ARW

34.8

cm³

LandMark™60 INS/GPS

A  high performance Inertial Navigation System with GNSS/GPS receiver. Our lowest noise inertial suite and Extended Kalman Filter enable our most accurate free inertial performance during GPS denial. The LandMark™60 INS/GPS is a preferred choice for customers who want the very best in a SWaP-C MEMS INS/GPS.
LandMark 60 INS/GPS

490°/s Gyroscopes

15g Accelerometers

0.1°

Pitch and Roll Angles

2 NMPH

Free Inertial (short term)

0.5°/s

Bias Stability

0.3°

Heading Accuracy

0.0016°/s/√Hz

ARW

113

cm³

LandMark™60 INS/GPS

LandMark 60 INS/GPS

490°/s Gyroscopes

15g Accelerometers

0.1°

Pitch and Roll Angles

2 NMPH

Free Inertial (short term)

0.5°/s

Bias Stability

0.3°

Heading Accuracy

0.0016°/s/√Hz

ARW

113

cm³

A  high performance Inertial Navigation System with GNSS/GPS receiver. Our lowest noise inertial suite and Extended Kalman Filter enable our most accurate free inertial performance during GPS denial. The LandMark™60 INS/GPS is a preferred choice for customers who want the very best in a SWaP-C MEMS INS/GPS.

LandMark™60 INS/GPS

LandMark 60 INS/GPS

490°/s Gyroscopes

15g Accelerometers

A  high performance Inertial Navigation System with GNSS/GPS receiver. Our lowest noise inertial suite and Extended Kalman Filter enable our most accurate free inertial performance during GPS denial. The LandMark™60 INS/GPS is a preferred choice for customers who want the very best in a SWaP-C MEMS INS/GPS.

0.1°

Pitch and Roll Angles

2 NMPH

Free Inertial (short term)

0.5°/s

Bias Stability

0.3°

Heading Accuracy

0.0016°/s/√Hz

ARW

113

cm³

AHRS

DIGS100

The DIGS™100 Inertial Guidance System is an IP68 MEMS AHRS designed for downhole orientation and directional guidance applications. The small size of this AHRS (1” diameter by 2.125” length) enables its use in tight drilling and utility spaces. The DIGS™100 Inertial Guidance System provides temperature compensated RS422/RS485 output of pitch, roll, and yaw angles. 

DIGS™100 Inertial Guidance System

490°/s Gyroscopes

15g Accelerometer

1″

Diameter

0.0028°/s/√Hz

ARW

500g

Shock Tolerance

IP68

Rating

0.25°

Pitch and Roll Angles

0.5°

Yaw and Toolface Angle

DIGS100

DIGS™100 Inertial Guidance System

490°/s Gyroscopes

15g Accelerometer

1″

Diameter

0.0028°/s/√Hz

ARW

500g

Shock Tolerance

IP68

Rating

0.25°

Pitch and Roll Angles

0.5°

Yaw and Toolface Angle

The DIGS™100 Inertial Guidance System is an IP68 MEMS AHRS designed for downhole orientation and directional guidance applications. The small size of this AHRS (1” diameter by 2.125” length) enables its use in tight drilling and utility spaces. The DIGS™100 Inertial Guidance System provides temperature compensated RS422/RS485 output of pitch, roll, and yaw angles. 

DIGS™100 Inertial Guidance System

490°/s Gyroscopes

15g Accelerometer

The DIGS™100 Inertial Guidance System is an IP68 MEMS AHRS designed for downhole orientation and directional guidance applications. The small size of this AHRS (1” diameter by 2.125” length) enables its use in tight drilling and utility spaces. The DIGS™100 Inertial Guidance System provides temperature compensated RS422/RS485 output of pitch, roll, and yaw angles. 

1″

Diameter

0.0028°/s/√Hz

ARW

500g

Shock Tolerance

IP68

Rating

0.25°

Pitch and Roll Angles

0.5°

Yaw and Toolface Angle

All Products are NON-ITAR

Contact Us
Gladiator Technologies Alternate Logo
Gladiator Technologies is a leading designer and manufacturer of high performance MEMS inertial sensors, systems including IMUs, INS, Gyroscopes and Accelerometers.

Contact Us

Gladiator Technologies

35329 SE Center St

Snoqualmie, WA 98065

Tel: 425.363.4180

Email: sales@gladiatortechnologies.com

A300D Document Download

Gladiator Technologies