MRM50 Analog IMU
The MRM50 IMU offers wide
• automotive testing
• railway motion monitoring
• track telemetry
• antenna stabilization & pointing
• flight testing
• laboratory use
LandMark™50 IMU (Digital Inertial Measurement Unit)
MRM10 IMU (Analog Inertial Measurement Unit)
MRM20 IMU (Analog Inertial Measurement Unit)
MRM30 IMU (Analog Inertial Measurement Unit)
MRM40 IMU (Analog Inertial Measurement Unit)
Inertial Measurement Unit
The MRM50 IMU is a substantial performance upgrade employing our latest low noise gyro technology for improved bias and with improved environmental sealing and MIL-SPEC connector. It provides internally temperature compensated analog output of gyros, accelerometers and temperature.The MRM 50 IMU is ideal for applications requiring simple analog outputs,rugged packaging with precision performance.
The MRM 50 IMU is ideal for applications requiring simple analog outputs, low cost, low power consumption, rugged packaging, small size, light weight and no inherent wear out modes for long life.
The unit is highly durable and can withstand environmental vibration and shock typically associated with motorsports racing and commercial aircraft requirements.
- 6 Degrees of Freedom MEMS IMU
Utilizing Gladiator's proprietary thermal modeling process, this unit is fully temperature compensated for bias and scale factor and also corrected for misalignment and g-sensitivity. The low noise MEMS gyros & accels enable precision measurement including excellent in-run bias and bias over temperature.
• 1°/hr in-run bias stability
• 0.0009°/sec/√Hz angle random walk
- • low power <630 mW typical
|MRM50IMU-100-02-200||or -06||or -10|
|MRM50IMU-175-02-200||or -06||or -10|
|MRM50IMU-300-02-200||or -06||or -10|
|MRM50IMU-100-02-250||or -06||or -10|
|MRM50IMU-175-02-250||or -06||or -10|
|MRM50IMU-300-02-250||or -06||or -10|
For -200 the analog signals are ±5 volts full scale measured with respect to signal ground pin 8.
For -250 the analog signals are ±2.5 volts full scale measured with respect to 2.5V reference pin 8.
Load > 5K Ohms & <100pf on each signal.
Ultra Low Noise NON-ITAR Commercial MEMS Analog IMU
|± 5 or ± 2.5 Volt Signal Output Swing|
Low Gyro Noise 0.0009°/sec/√Hz (100°/sec)
Low Accel Noise 0.02mg/√Hz (2g)
In-Run Gyro Bias 1°/hour 1σ
Fully Temperature Compensated Bias and Scale Factor
Compensated Misalignment 1/2 mrad and g-Sensitivity <0.002°/sec/g
Power <1 Watt Typical
Light Weight 500 grams
|Input Voltage +6V to +36V (single sided)|
Wide Sensor Bandwidth 200 Hz
|External Sync Input (1 kHz or 1pps)|
3 Internal Temperature Sensors
Export Classification: Commerce ECCN7A99
Datasheet & Technical User Guide
Oultline Drawing & Solid Model
Free .STEP File Reader available at: http://www.ida-step.net/
Product Test Data
How to Buy
To discuss configuration for your specific system requirements, please use our Contact page.
For large quantity orders or OEM discussions, please contact firstname.lastname@example.org.
If you are outside the US, please contact one of our representatives.