Home » Products » LandMark™ » VG/GPS's » LandMark™50

 

LandMark™ 50 VG/GPS

 

Quick-Access Documents

LandMark™50 VG/GPS DataSheet PDF

LandMark™50 VG/GPS User Guide PDF

Applications

 

The LandMark™50 VG/GPS offers wide

application usage:

 

platform stabilization

EO/IR stabilization

• antenna stabilization & pointing

• railway motion monitoring

• flight control & navigation

• automotive testing

•laboratory use

 

 

Similar Products

 

LandMark™50 IMU (Inertial Measurement

Unit)

LandMark™50 VG (Vertical Gyro)

LandMark™50 AHRS (Attitude & Heading

Reference System)

LandMark™50 GPS/AHRS (GPS-Aided

Attitude & Heading Reference System)

LandMark™50 INS/GPS (GPS-Aided Inertial Navigation System)

 

The LandMark™50 VG/GPS is Form, Fit, Function Interchangeable with the:

LandMark™30 VG/GPS

 

 

  • General
  • Features
  • Specification
  • Documentation

 

LMRK50VGGPS

GPS-Aided Vertical Gyro

 

The all new MEMS LandMark™50 VG/GPS is a high performance inertial sensors, our own G150Z MEMS gyros and A40 MEMS accelerometer, which enable precision
measurements including 1°/hour in-run and excellent bias over temperature.

 

The inertial suite provides internally temperature compensated RS485 output of delta velocity, delta theta, heading, pitch and roll angles and altitude information in a ruggedized package.

 

All units are integrated with a 72 channel C/A code GPS receiver with up to 18Hz GPS position update rate. GPS aiding is included in all units for turning error correction as well as for continued output during short-term GPS dropouts.

 

 

 

LMRK50VGGPS

6 Degrees of Freedom MEMS VG/GPS

 

The LandMark™ VG/GPS provides delta velocity and delta theta information and also provides GPS heading as well as roll and pitch (degrees) and GPS altitude (meters) outputs enabling position determination from a known starting point.

 

The GPS receiver is a 72 channel C/A code GPS receiver and offers up to 18Hz GPS position update rate. The low power receiver supports GPS, GLONASS, BeiDou, GALILEO and SBAS (WAAS, EGNOS, MSAS).


•   NON-ITAR Commercial MEMS VG/GPS

•   1°/hr in-run bias stability
•   0.0009°/sec/√Hz angle random walk

•   RS422/ RS485 Serial Data Format

•   Simple integration supported by SDK

 

Available Configurations:

LMRK50VGGPS-100-02-100 or -06 or -10
LMRK50VGGPS-175-02-100 or -06 or -10
LMRK50VGGPS-300-02-100 or -06 or -10
bullet

High Performance NON-ITAR Commercial MEMS GPS-Aided Vertical Gyro

bullet
72 Channel GNSS: GPS, GLONASS, BeiDou, QZSS & SBAS (Galileo Ready*)
bullet
SBAS: WAAS, EGNOS and MSAS User Selectable Option
bullet
Up to 18Hz GPS Position Update Rate
bullet
GPS Velocity Accuracy 0.05 m/s
bullet
GPS Heading Accuracy 0.3 degrees
bullet
GPS Accuracy ± 2.0m CEP w/ SBAS
bullet
Ultra Low Noise Gyros 0.0009°/sec/√Hz 1σ
bullet
Low Noise Accels 0.02mg/√Hz (2σ)
bullet
In-Run Gyro Bias 1°/hour 1σ
bullet
GPS-Aided Veloicty & Built-In Turning Error Correction
bullet
Fully Compensated Bias, Scale Factor, Misalignment, g-Sensitivity, Heading & Altitude
bullet
RS422/RS455 Serial Data Format
bullet
Low Power < 1 W typical
bullet
Input Voltage +6V to +36V
bullet
Light Weight < 550 grams
bullet
Small Size < 360cm3/21.8in3
bullet
Export Classification: Commerce ECCN7A994

 

 

How to Buy

 

To discuss configuration for your specific system requirements, please use our Contact page.

 

For large quantity orders or OEM discussions, please contact sales@gladiatortechnologies.com.

 

If you are outside the US, please contact one of our representatives.