LandMark™ Vertical GyrosHome » Products » LandMark™ » Vertical Gyros

 

 

 

All of our Vertical Gyros (VG's) output pitch and roll angles (no magnetometers) as well as corrected delta theta and delta velocity along with temperature. All VG's also have a common messaging protocol enabling a user to have a "common cockpit" to move up or down in performance without having to change any software in their system. All of our VG's feature bias and scale factor modeling over the entire operating temperature range, compensation for g-sensitivity and misalignment as well as internal vibration isolation, precision alignment and environmental sealing for robust performance in challenging environments.

 

Check out our Products Page for assistance in selecting/ comparing product families, models, and key performance parameters.

 

 

 

                HIGH PERFORMANCE 1°/hour MEMS VG                              

 

 

LandMark™50 VG

  • 1°/hour in-run bias
  • Ultra Low Gyro Noise 0.0009°/sec/√Hz
  • +6V to +36V Input Power (single sided)
  • RS422/RS485 Serial Interface
  • Serial Data Rate (1 kHz or 1 pps)
  • 200Hz Wide Sensor Bandwidth
  • 321cm³/19.6in³
  • 450 grams

More...

     
 
 

LandMark™40 VG

  • Ultra Low Gyro Noise 0.002°/sec/√Hz
  • 6°/hour in-run bias
  • +3.3V Input Power (single sided)
  • RS422/RS485 Serial Data
  • External Sync (1 kHz or 1 pps)
  • 200Hz Wide Sensor Bandwidth
  • < 72cm³/4.4inch³
  • 103 grams

More...

LandMark™30 VG

  • Very Low Gyro Noise 0.003°/sec/√Hz
  • 8°/hour in-run bias
  • +6V to +36V Input Power
  • RS422/RS485 Serial Data
  • External Sync (1 kHz or 1 pps)
  • 500Hz Wide Sensor Bandwidth
  • 321 cm³ / 19.6 Inch³
  • 388 grams

More...

 

LandMark™21 VG

  • Low Gyro Noise 0.004°/sec/√Hz
  • 10°/hour in-run bias
  • +3.3V Input Power (single sided)
  • RS422/RS485 Serial Data
  • External Sync (1 kHz or 1 pps)
  • 200Hz Wide Sensor Bandwidth
  • 16.4 cm³ / 1 Inch³
  • 28 grams

More...

LandMark™20 VG

  • Low Gyro Noise 0.01°/sec/√Hz
  • 15°/hour in-run bias
  • +3.3V Input Power (single sided)
  • RS422/RS485 Serial Interface
  • External Sync (1 kHz or 1 pps)
  • 140Hz Wide Sensor Bandwidth
  • < 72cm³/4.4inch³
  • 105 grams

More...

 

LandMark™10 VG

  • Low Gyro Noise 0.012°/sec/√Hz
  • 25°/hour in-run bias
  • +3.1V to +5.5V Input Power (single sided)
  • RS422/RS485 Serial Interface
  • External Sync (1 kHz or 1 pps)
  • < 72cm³/4.4inch³
  • 105 grams

More...