LandMark™ Inertial Measurement Units Home » Products » LandMark™ » Inertial Measurement Unit

 

 

 

All of our IMU's have a common messaging protocol enabling a user to have a "common cockpit" to move up or down in performance without having to change any software in their system. All of our IMU's feature bias and scale factor modeling over the entire operating temperature range, compensation for g-sensitivity and misalignment as well as internal vibration isolation, precision alignment and environmental sealing for robust performance in challenging environments. The LMRK01/60/70 IMU's offer data rates up to 2500Hz and the LMRK60/70 IMU also offer CANBUS interface in addition to our standard RS422/RS485.

 

Please see our Products Page for assistance in selecting/comparing product families or contact the factory at sales@gladiatortechnologies.com.

 

 

 

LandMark™ Inertial Measurement Units

 

 

                LandMark™70 IMU High Performance 1°/hour IMU                                LandMark™60 IMU Small Size 3°/hour MEMS IMU

 

 

 

LandMark™70 IMU

  • 1°/hour in-run bias
  • Ultra Low Gyro Noise 0.0009°/sec/√Hz ~ 0.038°/√Hr
  • Low Accel Noise 0.02mg/√Hz
  • +6V to +36V Input Power (single sided)
  • RS422/RS485 Serial Data Rate (2.5kHz user selectable)
  • CANBUS 2.0B 1 MHz
  • External Sync Input (5 kHz)
  • 200Hz Wide Sensor Bandwidth
  • 321cm³/19.6in³
  • <450 grams

More...

 

 

LandMark™60 IMU

  • 3°/hour in-run bias
  • Low Gyro Noise 0.003°/sec/√Hz
  • Low Accel Noise 0.05mg/√Hz
  • +7V to +36V Input Power
  • RS422/RS485 Serial Data Rate (2.5kHz user selectable)
  • CANBUS 2.0B 1 MHz
  • External Sync Input (5 kHz)
  • 250Hz Wide Sensor Bandwidth
  • 76cm³/4.6in³
  • <115 grams

More...

 

 

 

 

                 LandMark™01 IMU Low Cost 1" Cube - 5°/hour IMU                       LandMark™50 IMU Wide Power Input 1-2°/hour MEMS IMU

 

 

 

LandMark™01 IMU

5°/hour in-run bias

Low Gyro Noise 0.003°/sec/√Hz

  • Low Accel Noise 0.09mg/√Hz
  • +2.7 to 3.6V Input Power
  • RS422/RS485 Serial Data Rate (1kHz user selectable)
  • External Sync Input (5 kHz)
  • 250Hz Wide Sensor Bandwidth
  • 16.4cm³/1.0in³
  • <29 grams

More...

 

 

LandMark™50 IMU

1°/hour in-run bias

  • Ultra Low Gyro Noise 0.0009°/sec/√Hz ~ 0.038°/√Hr
  • Low Accel Noise 0.02mg/√Hz
  • +6V to +36V Input Power (single sided)
  • RS422/RS485 Serial Interface
  • Serial Data Rate (1000 Hz user selectable)
  • External Sync (1 kHz 1pps)
  • 200Hz Wide Sensor Bandwidth
  • 321cm³/19.6in³
  • <450 grams

More...

 
 

 

 

LandMark™ 40 IMU

  • Ultra Low Gyro Noise 0.002°/sec/√Hz
  • 6°/hour in-run bias
  • +3.3V Input Power (single sided)
  • RS422/RS485 Serial Interface
  • External Sync (1 kHz or 1 pps)
  • 200Hz Wide Sensor Bandwidth
  • < 72cm³/4.4inch³
  • 103 grams

More...

LandMark™ 30 IMU

  • Very Low Gyro Noise 0.003°/sec/√Hz
  • 8°/hour in-run bias
  • +6V to +36V Input Power
  • RS422/RS485 Serial Interface
  • External Sync (1 kHz or 1 pps)
  • 140Hz Wide Sensor Bandwidth
  • 321 cm³ / 19.6 Inch³
  • 388 grams

More...

 

LandMark™ 21 IMU

  • Low Gyro Noise 0.004°/sec/√Hz
  • 8°/hour in-run bias
  • +3.3V Input Power (single sided)
  • RS422/RS485 Serial Interface
  • External Sync (1 kHz or 1 pps)
  • 200Hz Wide Sensor Bandwidth
  • 16.4 cm³ / 1 Inch³
  • 28 grams

More...

LandMark™ 20 IMU

  • Low Gyro Noise 0.01°/sec/√Hz
  • 15°/hour in-run bias
  • +3.3V Input Power (single sided)
  • RS422/RS485 Serial Interface
  • External Sync (1 kHz or 1 pps)
  • 140Hz Wide Sensor Bandwidth
  • < 72cm³/4.4inch³
  • 110 grams

More...

 

LandMark™ 10 IMU

  • Low Gyro Noise 0.012°/sec/√Hz
  • 25°/hour in-run bias
  • +3.1V to +5.5V Input Power (single sided)
  • RS422/RS485 Serial Interface
  • External Sync (1 kHz or 1 pps)
  • < 72cm³/4.4inch³
  • 105 grams

More...