The LandMark™10 IMU offers wide
• airborne platform stabilization
• EO/IR stabilization
• antenna stabilization & pointing
• LIDAR stabilization
• flight testing & navigation
• racing yacht marine compass
LandMark™10 VG (Vertical Gyro)
LandMark™10 AHRS (Attitude & Heading
LandMark™10 VG/GPS (GPS-Aided
LandMark™10 GPS/AHRS (GPS-Aided
Attitude & Heading Reference System)
The LandMark™10 IMU is Form, Fit, Function Interchangeable with the:
Inertial Measurement Unit
The economy class LandMark™10 IMU employs our latest low noise gyro technology for improved bias and with improved environmental sealing and MIL-SPEC connector. It provides internally temperature compensated RS485 output of delta velocity and delta theta.
The LandMark™ 10 IMU is ideal for applications requiring low cost, ultra low power consumption, rugged packaging, small size, light weight and no inherent wear out modes for long life.
The signature feature of the IMU is the performance, which is optimized with fully temperature compensated bias and scale factor, compensated misalignment and g-sensitivity. The unit is highly durable and employs an FEA designed internal vibration isolator that can withstand environmental vibration and shock typically associated with commercial aircraft requirements.
- 6 Degrees of Freedom MEMS IMU
The LandMark™10 IMU is ideal for applications demanding excellent performance coupled with requirements for both small size and challenging environments at low cost. In addition to low noise gyros and accelerometers the unit features low power consumption, light weight, long life MTBF and enhanced packaging.
• 25°/hr in-run bias stability
• 0.014°/sec/√Hz angle random walk
- • RS422/ RS485 Serial Data Format
- • Data Rate 500 Hz (user selectable)
- • Simple integration supported by SDK
|Low Cost & Rugged Economy Class IMU|
|Vertical Gyro Option Available Pitch & Roll Angles ±0.25°|
Low Gyro Noise 0.012°/sec/√Hz 1σ
Low Accel Noise 0.07mg/√Hz (2g) 1σ
In-Run Gyro Bias 25°/hour 1σ
|Rugged Environmentally Sealed Packaging & MILSPEC Connector|
Fully Temperature Compensated Bias and Scale Factor
Compensated Misalignment 1mrad and g-Sensitivity <0.03°/sec/g 1σ
|Low Voltage +3.1V to +5.5V (single sided)|
Light Weight 105 grams
Small Size <72cm3/4.4in3
RS485 Data Rate 500 Hz (user selectable)
Wide Sensor Bandwidth 200 Hz
Bandwidth Filtering Capability
Internal Vibration Isolation
3 Internal Temperature Sensors
|Export Classification: Commerce ECCN7A994|
Datasheet & Technical User Guide
Oultline Drawing & Solid Model
Free .STEP File Reader available at: http://www.ida-step.net/
Software Development Kit
Product Test Data
How to Buy
To discuss configuration for your specific system requirements, please use our Contact page.
For large quantity orders or OEM discussions, please contact email@example.com.
If you are outside the US, please contact one of our representatives.