Home » Products » LandMark™ » GPS/AHRS » LandMark™10

 

LandMark™10 GPS/AHRS

 

Quick-Access Documents

LandMark™10 GPS/A DataSheet PDF

LandMark™10 GPS/A User Guide PDF

Applications

 

The LandMark™10 GPS/AHRS offers wide

application usage:

 

airborne platform stabilization

EO/IR stabilization

• antenna stabilization & pointing

• LIDAR stabilization

• flight testing & navigation

• racing yacht marine compass

 

 

Similar Products

 

LandMark™10 IMU (Inertial Measurement

Unit)

LandMark™10 VG (Vertical Gyro)

LandMark™10 AHRS (Attitude & Heading

Reference System)

LandMark™10 VG/GPS (GPS-Aided

Vertical Gyro)

The LandMark™10 GPS/AHRS is Form, Fit, Function Interchangeable with the:

LandMark™20 GPS/AHRS

LandMark™40 GPS/AHRS

 

 

  • General
  • Features
  • Specification
  • Documentation

 

LMRK10GPSA

GPS-Aided Attitude & Heading Reference System

 

The LandMark™10 GPS/AHRS is our economy class model of our standard LandMark™ GPS/AHRS. The unit features low noise gyros and accelerometers with exceptional bias in-run and bias over temperature performance with integrated GPS-Aiding in a small, light weight and low power ruggedized package at very low cost. The unit provides RS485 output of delta velocity, delta theta, heading, pitch and roll angles, altitude information, position, velocity and precision time.

 

The inertial suite provides internally temperature compensated RS485 output of delta velocity, delta theta, heading, pitch and roll angles and altitude information in a ruggedized package.

 

All units are integrated with a 72 channel C/A code GPS receiver with up to 18Hz GPS position update rate. GPS aiding is included in all units for turning error correction as well as continued output during short-term GPS dropouts.

 

 

 

LMRK10GPSA

9 Degrees of Freedom MEMS GPS/AHRS

 

The LandMark™ GPS/AHRS provides delta velocity and delta theta information as well as GPS heading, roll and pitch (degrees) and both GPS and barometric altitude (meters) outputs enabling position determination from a known starting point.

 

The GPS receiver is a 72 channel C/A code GPS receiver and offers up to 18Hz GPS position data rate updates. The low power receiver supports GPS, GLONASS, BeiDou, GALILEO and SBAS (WAAS, EGNOS, MSAS).


•   NON-ITAR Commercial MEMS GPS/AHRS

•   25°/hr in-run bias stability
•   0.012°/sec/√Hz angle random walk

•   RS422/ RS485 Serial Data Format

•   Simple integration supported by SDK

 

Available Configurations:

LMRK10GPSA-075-02-100 or -10
LMRK10GPSA-150-02-100 or -10
LMRK10GPSA-300-02-100 or -10

bullet
Small, Light Weight and Low Power MEMS GPS-Aided AHRS
bullet
Rugged Environmentally Sealed Packaging & MILSPEC Connector
bullet
Low Noise Gyros 0.012°/sec/√Hz
bullet
Low Noise Accels 0.07mg/√Hz
bullet
In-Run Gyro Bias 25°/hour 1σ
bullet
Heading ±0.5° stationary
bullet
Pitch and Roll Angles ±0.25° stationary
bullet
Redundant Altitude ±3 meters 1σ
bullet
Fully Compensated Bias, Scale Factor, Misalignment, g-Sensitivity, Heading & Altitude
bullet
Kalman Filter GPS-Aiding of Velocity & Altitude
bullet
Single RS485 Data Rate 100Hz
bullet
GPS Receiver - 72 Channel C/A Code & up to 18Hz GPS Position Data Update Rate
bullet
GPS Accuracy ±2.5m CEP stationary
bullet
Supports WAAS, EGNOS and MSAS
bullet
Low Power < 825 milliwatts typical
bullet
Light Weight < 160 grams
bullet
Small Size < 108cm3/6.6in3
bullet
Low Voltage +3.3V (single sided power)
bullet
Bandwidth Filtering Capability
bullet
Vibration Isolation, Precision Alignment & Shock Resistant
bullet
Self Test & 6ea Internal Temp Sensors
bullet
Export Classification: Commerce ECCN7A994

 

 

How to Buy

 

To discuss configuration for your specific system requirements, please use our Contact page.

 

For large quantity orders or OEM discussions, please contact sales@gladiatortechnologies.com.

 

If you are outside the US, please contact one of our representatives.