Home » Products » LandMark™ » AHRS » LandMark™30

 

LandMark™30 AHRS

 

Quick-Access Documents

LandMark™30 AHRS DataSheet PDF

LandMark™30 AHRS User Guide PDF

Applications

 

The LandMark™30 AHRS offers wide

application usage:

 

airborne platform stabilization

EO/IR stabilization

• antenna stabilization & pointing

• LIDAR stabilization

• flight testing & navigation

• racing yacht marine compass

 

Similar Products

 

LandMark™30 IMU (Inertial Measurement

Unit)

LandMark™30 VG (Vertical Gyro)

LandMark™30 VG/GPS (GPS-Aided

Vertical Gyro)

LandMark™30 GPS/AHRS (GPS-Aided

Attitude & Heading Reference System)

The LandMark™30 AHRS is Form, Fit, Function Interchangeable with the:

LandMark™50 AHRS

 

 

  • General
  • Features
  • Specification
  • Documentation

 

LMRK30AHRS

Attitude & Heading Reference System

 

The LandMark™30 AHRS offers Open Loop FOG performance utilizing our own low noise MEMS gyros (0.003°/sec√Hz) and accelerometers (0.04mg/√Hz). This Attitude and Heading Reference System (AHRS) employs a fixed gain Kalman filter and features 8°/hour in-run bias and excellent bias over temperature.

 

An internal vibration isolation system enables temperature compensated RS485 output of delta velocity, delta theta, heading, pitch and roll angles and altitude information in a ruggedized package. Built-in software enables an external velocity input (user supplied) turning error correction as well as a 1pps sync.

 

 

 

 

LMRK30AHRS

  • 9 Degrees of Freedom MEMS AHRS

 

This AHRS performance is optimized with fully compensated bias, scale factor, misalignment, g-sensitivity, heading, pitch and roll angles and altitude information. This is in a ruggedized environmentally sealed package that is EMI resistant and includes a MILSPEC connector.

 

The unit is highly durable and can withstand environmental vibration, shock and EMI typically associated with commercial aircraft requirements. The LandMark™ AHRS is well suited for commercial flight control, navigation, marine, antenna stabilization and pointing, general aviation as well as laboratory use.


•   8°/hr in-run bias stability
•   0.003°/√Hz angular random walk

  • •   RS485 Serial Data Format
  • •   Data Rate 100 Hz (user selectable)
  • •   Simple integration supported by SDK

 

Available Configurations:

LMRK30AHRS-100-02-100 or -06 or -10
LMRK30AHRS-175-02-100 or -06 or -10
LMRK30AHRS-300-02-100 or -06 or -10
bullet
High Performance and Low Noise Silicon MEMS Digital AHRS
bullet
Low Gyro Noise 0.003°/sec/√Hz
bullet
Low Accel Noise 0.04mg/√Hz
bullet
In Run Gyro Bias 8°/hour 1σ
bullet
Heading ±0.5° stationary
bullet
Pitch & Roll ±0.25° stationary
bullet
Altitude ±3m 1σ
bullet
Fully Temperature Compensated Bias and Scale Factor
bullet
Compensated Misalignment 1mrad and g-Sensitivity <0.01°/sec/g 1σ
bullet
Low Voltage +6v to +36V (single sided power)
bullet
Light Weight 405 grams
bullet
Small Size < 358cm3/21.8in3
bullet
RS485 Data Rate 100 Hz (user selectable)
bullet
Wide Sensor Bandwidth 140 Hz
bullet
Bandwidth Filtering Capability (user selectable)
bullet
Internal Vibration Isolation
bullet
6 Temperature Sensors
bullet
Export Classification: Commerce ECCN7A994

 

 

How to Buy

 

To discuss configuration for your specific system requirements, please use our Contact page.

 

For large quantity orders or OEM discussions, please contact sales@gladiatortechnologies.com.

 

If you are outside the US, please contact one of our representatives.