New "LN Series" Inertial Measurement Units - Low Noise and Excellent Bias |
Gladiator Technologies is proud to our announce our next generation of advanced technology inertial systems which implement our newest and highest performance family of gyros and accelerometers. The "LN Series" implements new lower noise gyros and accelerometers into our existing family of LandMark™ systems offering both lower noise, better bias and various packaging improvements including improved environmental sealing and connectors. To assist you in selecting which system might best suit your application requirements a comparison of the product families, product models and key performance parameters of our inertial families is below:
* click on image to expand and download inertial families and performance comparisons chart
All of our IMU's have a common messaging protocol enabling a user to have a "common cockpit" to move up or down in performance without having to change any software in their system. All of our IMU's feature bias and scale factor modeling over the entire operating temperature range, compensation for g-sensitivity and misalignment as well as internal vibration isolation, precision alignment and environmental sealing for robust performance in challenging environments.
|
|
-
LandMark™ 40 IMU
-
Ultra Low Noise MEMS IMU - (0.002°/sec/√Hz)
-
10°/hour in-run bias
-
4.4 Cubic Inch
-
103 grams
-
Form, Fit & Function Interchangeable with LandMark™ 10 and 20 IMU's
-
+3.3V Input Power
-
FEA-Designed Internal Vibration Isolation
-
External Sync (1 kHz or 1 pps)
More... |
| |
|
|
-
LandMark™ 30 IMU
-
Very Low Noise MEMS IMU - (0.003°/sec/√Hz)
-
8°/hour in-run bias
-
19.6 Cubic Inch
-
388 grams
-
Form, Fit & Function Interchangeable with LandMark™ 50 IMU
-
+6V to +36V Input Power
-
Shock Resistant
-
External Sync (1 kHz or 1 pps)
More... |
| |
|
|
-
LandMark™ 21 IMU - Ultra Small & Very Low Noise
-
Low Noise MEMS IMU - (0.004°/sec/√Hz)
-
10°/hour in-run bias
-
1 Cubic Inch
-
28 grams
-
Same messaging protocol as other LandMark™ IMU's
-
+3.3V Input Power
-
FEA-Designed Internal Vibration Isolation
-
External Sync (1 kHz or 1 pps)
More... |
| |
|
|
-
LandMark™ 20 IMU
-
Low Noise MEMS IMU - (0.01°/sec/√Hz)
-
15°/hour in-run bias
-
4.4 Cubic Inch
-
108 grams
-
Form, Fit & Function Interchangeable with LandMark™ 10 and 40 IMU's
-
+3.3V Input Power
-
FEA-Designed Internal Vibration Isolation
-
External Sync (1 kHz or 1 pps)
More... |
| |
|
|
-
LandMark™ 10 IMU
-
Low Cost MEMS IMU - Gyro Noise 0.014°/sec/√Hz
-
25°/hour in-run bias
-
4.4 Cubic Inch
-
106 grams
-
Form, Fit & Function Interchangeable with LandMark™ 20 and 40 IMU's
-
+3.3V Input Power
-
FEA-Designed Internal Vibration Isolation
-
External Sync (1 kHz or 1 pps)
More... |
|
Legacy Products & Support
Not Recommended for New Designs
|
| |
|
The original high performance LandMark™30 product family has been superceded by our LandMark™30 IMU "LN Series" product family, which offers improved lower noise gyros and accelemeters as well as improved packaging, MIL-SPEC connectors and other performance enhancements.
More...
|
| |
|
The original mid-performance LandMark™ 20 product family has been superceded by our LandMark™20 IMU "LN Series", which offers improved lower noise gyros and accelemeters as well as improved packaging, MIL-SPEC connectors and other performance enhancements.
More...
|
|
|
The original "economy class" entry-level LandMark™ 10 product family has been superceded by our LandMark™20 IMU "LN Series", which offers improved lower noise gyros and accelemeters as well as improved packaging, MIL-SPEC connectors and other performance enhancements.
More...
|
| |
| |
| |
